Micronic Filter Cloth

Particle Retention and Flow Rate Data

Plain Dutch Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
325	0.0128	0.059	1.03	3.8	8.5	47
295	0.0116	0.048	0.76	3.7	8.3	45
245	0.0096	0.037	0.69	3.6	8.3	44
138	0.0054	0.03	0.52	3.5	7.9	43
102	0.0042	0.021	0.37	3	7.3	38
84	0.0033	0.016	0.27	2.5	7.2	35
82	0.0032	0.02	0.38	1.6	4.5	27
64	0.0025	0.012	0.22	1.9	6.2	33
62	0.0024	0.016	0.28	1.3	4.4	26
49	0.0019	0.013	0.23	1	4.2	24

Twilled Dutch Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
98	0.0039	0.035	0.85	1.12	4.1	19
90	0.0035	0.027	0.56	1.20	4.2	21
74	0.0029	0.028	0.61	1.05	3.1	17
69	0.0027	0.028	0.64	0.90	3.0	16
46	0.0018	0.022	0.59	0.45	2.6	14
41	0.0016	0.012	0.26	0.63	4.1	21
36	0.0014	0.014	0.36	0.24	2.1	12
32	0.0013	0.011	0.25	0.31	2.4	14
17	0.0007	0.006	0.16	0.12	1.89	11
10	0.0004	0.006	0.16	0.10	1.66	9.2
5	0.0002	0.003	0.10	0.06	1.12	7.8

Twilled Square Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
145	0.0057	0.033	0.53	4.7	10.1	50
141	0.0055	0.018	0.28	7.2	12.3	84

Micron Rating:

This data was determined using the "bubble point" test method.

One micron equals 0.00003937" or 0.001mm.

Flow Rate Data:

This data was based on a test sample one square inch in area.

Oil - MIL-H-5606-B @ 80�F (viscosity 90 SSU) at 1 psid.

Fuel - MIL-F-7024-A, Type II @ 78�F (viscosity 35 SSU) at 1 psid.

Air - Tested @ 75�F at 1 psid.

Send mail to : service@screentg.com with questions about micronic particle filtration cloth.

Last modified: June 28, 2002